There are many types of Lifetime radon mitigation, with different methods being more effective than others. The most common is sub-membrane depressurization, which requires a qualified radon contractor to install. This method uses a reinforced plastic liner that is laid over the earth floor, with a vent pipe and fan combination sucking radon out from under the liner. This method reduces radon levels by approximately 90 percent.
Radon Mitigation – What Type of Radon Mitigation System is Right For Your Home?
To minimize your risk of developing lung cancer, you should get the services of a radon mitigation contractor who is certified in the field. Ask them for their National Radon Safety Board or National Radon Proficiency Program certification, and make sure to independently verify this certification. Doing radon mitigation yourself can cause more harm than good, and using the wrong equipment could increase your radon levels. The type of radon mitigation system you need will depend on your home and its unique conditions.
A sub-slab depressurization system is another option for radon mitigation. This method utilizes a fan and PVC pipe to vent air above the roof, which quickly dissipates radon in the air. Typical systems cost anywhere from $500 to $2,500. You can also install a vapor barrier in your crawl space. This will create an airtight hole to install a radon mitigation system.
To install a radon mitigation system, you should know that the installation process consists of several steps. First, the system will actively pull air from the ground. The air will then travel through the foundation, piping inside and outside of the house, and finally, through the roof. As a result, you will not be breathing radon into your home. In fact, your home will still breathe radon in if you do not have a radon mitigation system.